▫ 訂購說明

．此產品為卡扣強化地板，表層印刷仿木紋約16種紋路版本循環，重複性高不得挑選。

．請事先詢問庫存，拆箱無法退。

．不同地面材質交界處及房門下需下分隔條，高低落差處需下起步條。

．四周圍留伸縮縫至少10mm塞棉條矽利康收邊。

．熱漲冷縮時矽利康會擠出為正常，不再重打。

．大空間長或寬八米以上須斷開加區隔條。

．週圍牆角不可被系統櫃或木作櫃子重壓。

▫ 包裝明細

．1380mm/6支/0.65坪/箱。

▫ 安裝選擇：

．2mm地墊 → 將地板以漂浮方式鋪在地墊上→周圍留10mm伸縮縫塞棉條後矽利康收邊→餘料垃圾清運。

(工法流程請詳見官網安裝說明影片)

 

▫ Ordering Instructions

． This product is a snap-on laminate flooring with imitation wood grain printed on the surface. There are about 16 texture versions in circulation. It is highly repetitive and cannot be selected.

． Please inquire about stock in advance, unboxing cannot be returned.

． Separator strips are required at the junction of different floor materials and under the door, and starting strips are required at the height difference.

． Leave an expansion gap of at least 10mm around and seal with tampons and silicone.

． It is normal for the silicone to extrude when it expands due to heat expansion and contraction, and will not be re-pressed.

． If a large space is more than eight meters long or wide, the dividing strips must be disconnected.

． The surrounding corners should not be weighed down by system cabinets or wooden cabinets.

▫ Packaging details

． 1380mm/8 pieces/0.65 ping/carton.

▫ Installation options:

． 2mm floor mat → Lay the floor on the floor mat in a floating manner → Leave a 10mm expansion joint around and fill it with cotton strips and then close the edge with silicone → Remove the remaining waste.

(Please refer to the installation instruction video on the official website for details on the construction method)